[. . . ] EN SAFETY INSTRUCTIONS - PART B • The manufacturer advises the correct use of lighting fittings!Therefore always follow these instructions to ensure correct and safe installation and functioning of the fitting and keep it for future reference. [. . . ] 02- The fitting is not suitable for installation in bathrooms at least not in the specified zone. 03- The fitting is suitable for fixing to normal flammable surfaces. Recessed luminaires should under no circumstances be covered with insulation material or other similar materials. The earth wire (yellow/green) has to be connected to the clip marked with . 05- Protection class II: the fitting is double insulated and must not be connected to an Earth. 06- Protection class III: the fitting is only suitable for very low voltage supply (e. 07- X-connection: In case of damage to the wire, it has to be replaced by a wire of the same type. Y-connection: In case of damage to the wire, it has to be replaced only by the manufacturer, distributor or by an expert, to avoid risks. 10- All products with a SmartLink logo can be connected to your remote control. The lighting fitting – as well as all other products from the collection – is designed, produced and tested in accordance with the strictest European safety standards (EN 60. [. . . ] The manufacturer does not accept any liability for damage caused as a result of misuse or wrong application of the fitting. Kui tootele on kinnitatud see läbikriipsutatud ratastel konteineri märk, tähendab see, et toode rahuldab Euroopa Direktiivi 2002/96/EÜ nõudeid Palume teil otsida infot oma kohaliku elektriliste ja elektroonikatoodete kogumise ja utiliseerimise süsteemi kohta. [. . . ]